Laboratory tests

TESTING LABORATORY 01-073
(accredited according to the requirements of SRPS ISO / IEC 17025:2006)

DEPARTMENT OF ECOTOXICOLOGICAL RESEARCH

1. FOOD TESTING (sensory, physical and chemical testing)

honey and honey products, eggs and egg products, soups, sauces, seasonings and related products, pudding powder, baking powder, extra funds for food, flavorings, additives (dyes, preservatives, antioxidants, acids, acidity regulators , thickeners, stabilizers, emulsifiers, means for gelling, humektants, hardeners, means for glazing, means for treating the flour, propelenti, sweeteners, means of increasing capacity, modified starches ), enzyme preparations, herbal products, wine, alcoholic beverages and feed.

2. MICROBIOLOGICAL FOOD TESTS

Meat and meat products, milk and milk products, spices, albuminous products and additives, semi-prepared dishes for baking or cooking, ready-made frozen meals from vegetables or foods of plant origin, with or without the addition of meat, meat products or offal, ready meat, offal other animal foods and supplements, prepared meals of vegetables or foods of plant origin, with or without the addition of meat, meat products or offal, rennet, fresh shell eggs, egg powder and frozen lupan eggs, frozen dough , all kinds of pasta, cereal, pastry and bakery products, plates full of chocolate, filled chocolates and chocolate desserts, marzipan, Turkish delight, cakes and other products, powdered chocolate, candy, confectionery, chewing gum, cookies, waffles, wafers and other products, industrial dairy creams and cakes with cream and creams, chestnut puree with walnuts and wheat, all kinds of starches, sugar, concentrates for soups and concentrates with accessories, mayonnaise and mustard, lettuce with mayonnaise, margarine, un pasteurized beer, frozen fruits and vegetables, dried fruits and vegetables, candied fruits, roasted peanuts with shell, shelled nuts, poppy seeds, coffee, various seeds and chick peas, shelled roasted peanuts, salted almonds, and similar products, pasteurized products from fruits, vegetables and mushrooms, sterilized canned fruit, vegetables and mushrooms, roasted coffee, cocoa powder, ground coffee packaging, custard powder, fruit juices and refreshing fruit drinks, concentrated fruit juices, fruit syrups, flavored syrups, soft carbonated soft drinks, water (natural mineral water, natural spring water and table water) in a dry form of teas, dried baby food that is cooked before using, or that are not cooked before use, powdered milk, ready-made baby food in liquid form or mushy in sealed vessels, animal feed.

3. TESTING OBJECTS OF GENERAL USE

Objects made of polymer materials, packaging for food products: paper and cardboard, plastic, glass, mixed, toys, tools to maintain personal hygiene, hygiene items and clean the dishes and cutlery.

4. MICROBIOLOGICAL TESTING OF GENERAL USE OBJECTS

Utensils and disposable, other equipment, means of maintaining personal hygiene, care and beauty face and body, means for maintaining cleanliness in the household, work surfaces in food premises for business.

5. TESTING OF PACKAGING (aluminum packaging and tinplate packaging, paper, glass, textiles and polymers)

Determination of heavy metal, heavy metal migration, the migration of lead, cilicium, low-molecular organic, inorganic substances, formaldehyde, migration of formaldehyde, phenol index from the model solution, polychlorinated biphenyls, difenila, thermal test, pH, total pesticides, organic compounds, polycyclic aromatic hydrocarbons, residual vinyl chloride monomer, acrylonitrile backward - monomers, residual styrene - monomer, migration softener (dibutyl-, dioctyl-di 2-ethyl hexylftalt), total migration of primary (aniline) and secundary (diphenylamine) amine, naphthylamine , and 4-enzidin aminodiphenil.

6. WATER TESTING (surface, groundwater, drinking water, waste water)

Determination of color, odor, visible waste materials, measuring temperature, pH, conductivity, dissolved oxygen, turbidity, suspended solids, sediment material after 2 h, suspended matter - the residue after burning, alkalinity, acidity, hardness, COD, permanganatnog index, BOD5 , chloride, ammonia, ammonium ions, nitrite, nitrate, nitrate and total nitrate-nitrogen nitritnog, total nitrogen, total phosphorus, phosphate and pirosfata, sulphate, sulphide, phenol index, PAHs, oil and grease, pesticides, PCB, pesticide residues, organochlorine insecticides, chlorbenzen, volatile organic compounds, organic components, metals, hydrocarbons (S10-S40) originating from oil, fluoride, cyanide, halogenated organic compounds (AOX), 2,3,7,8 - tetrachlor dibenzo-p-dioxins, phenols, total organic carbon (TOC), anionic PAM, free and total chlorine, UV absorption, anionic surfactants, anions - bromod, fluorides, chlorides, nitrates, nitrites, sulfates, and orthophosphate, cations - NH4 +, Li +, Na +, K +, Ca 2 + and Mg 2 +, and residual chlorine.

7. Soil and sediment testing

Determination of true specific gravity (volume), total porosity, soil texture, structural analysis of aggregate dry sieving, determination of structural stability of macroagregates the deterioration in the water, hydrological constants, filtration area, accessible water capacity of soil to air, active acidity, potential acidity, free calcium carbonate, humus, total nitrogen by the Kjeldahl-in, mineral nitrogen, the total amount of macro-and micronutrients and heavy metal destruction with nitric acid, the reaction of soil paste (pH), soluble cations, the adsorbed cations, the pesticides and their metabolites of polycyclic aromatic hydrocarbons, polychlorinated biphenyls (PCBs), total organic carbon TOC, phenols, volatile organic compounds, total phosphorus, moisture, loss on ignition, dry matter, fats and oils and hydrocarbons of petroleum origin (C10-C40, mineral oil).

8. WASTE CHARACTERIZATION AND TESTING, TRANSBOUNDARY MOVEMENT OF WASTES

classified according to the catalog of waste (Official Gazette of. RS 55/01)

Determination of ammonium ions, AOX, conductivity, metals, phenol index, total organic carbon, weakly bound cyanide, fluoride, pH, NO2-, total S, SO42-, the total percent moisture, percent solids, loss on ignition, after the evaporation residue at 105 ° C, polychlorinated biphenyls, total organic carbon TOC, ammonia, nitrite, nitrate, cyanide, fluoride, phenol index, phosphate, sulfide, chloride, conductivity, total and soluble metals, sulfate, fats and oils, hydrocarbons originating from oil (C10-C40, mineral oil), organic substances (RAN, pesticides, RSV, and polychlorinated polibromovani hydrocarbons), metals and PCBs in oil, total sulfur, volatile organic components, inorganic anions, PCB, PCT, PCBT in the waste oil , the upper calorific value, sulfur and halogen, flash point and ash.

Solid fuels derived from waste (SRF)

Determination of volatile matter, ash, carbon (C), hydrogen (H) and nitrogen (N), sulfur (S), chlorine (Cl), fluorine (F) and bromine (Br), the main elements (Al, Ca, Fe , K, Mg, Na, P, Si, Ti), trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn), pure aluminum, moisture, particle size distribution, biomass, calorific value.

9. AIR QUALITY TESTING

9.1. Measurement of emissions (exhaust gas)

Determination of ammonia, nitrogen dioxide, hydrogen sulfide, particulate matter, acetone, methanol, ethanol, acrolein, metilacetata, chlorine, hydrogen chloride and chloride, Hydrogen Fluoride and fluoride, formaldehyde, mercaptans, total polycyclic aromatic hydrocarbons, ozone, aromatic hydrocarbons BTEX, Pb, Hg , As, Be, Cd, Ni, Mn, Cr, Zn, Mg, Cu, Cr, Fe, Ba, Ca, Co, Se, Sn, Na / K, Al, Ag, Ge, Si, Mo, Tl, V and Cr6 + in powdered substances, determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V, cresol (all isomers) and phenol, vinyl acetate, dimethoate, hydrogen peroxide , phthalates, volatile organic compounds (aliphatic hydrocarbons, alcohols, halogenated hydrocarbons, hydrocarbons, esters and glycol ethers), PCBs, tetrahydrofuran, PAHs, acrylonitrile, acetic acid, hydrogen cyanide, sulfur hexa fluoride, SF6, hydrocarbons originating from oil. Emission of gaseous pollutants from waste water from reservoirs and tanks.

9.1.1. Automatic analyzers:

Determining the characteristics of waste gas: temperature, flow rate, RH relative humidity, air velocity, absolute and differential pressure, determining the mass concentration of NO2, SO2, CO, NO, NOx, H2S, O2, CO2, CxHy, methane, ammonia and smoke-Catran number , the total gaseous organic carbon, measuring oganic and inorganic compounds in the vapor phase in the show FTIR method.

9.2. Examination of ambient air quality (emission measure)

Determination of mass concentration of ammonia, nitrogen dioxide, sulfur dioxide, formaldehyde, ozone, hydrogen sulfide, soot, particulate matter PM 10, PM 2.5, PM1, total sediment matter (soluble and insoluble), acetone, methanol, ethanol, acrolein, metilacetata, chlorine , hydrogen chloride, Hydrogen Fluoride and fluorine, mercaptan, total polycyclic aromatic hydrocarbons, aromatic hydrocarbons BTEX, Pb, Cd, Ni, Mn, Cr, Zn, Mg, Cu, Cr, Fe, Ba, Ca, Co, Se, Sn, Na / K, Al, Ag, Si, Ge, Mo, Tl, Hg, Be, V, As and Cr6 + in suspended matter and aerosediment, the concentration of hydrogen ions (pH), electrolytic conductivity, cresol (all isomers) and phenol, volatile organic compounds), carbon monoxide, asbestos, dimethoate, hydrogen peroxide, phthalates, PCBs, tetrahydrofuran, dioxins and furans, the concentrations of PAHs, acrylonitrile, acetic acid, organic compounds, hydrocarbons originating from oil.

9.2.1. Mobile station for monitoring of air emissions

Determination of mass concentration BTEΧ's, meteorological parameters (temperature, wind speed, pressure, wind direction, RH relative humidity, rainfall, solar radiation).

DEPARTMENT OF PHYSICAL AND MECHANICAL TESTS

1. Chemical testings

Welded joints, Watertube boilers and auxiliary equipment, industrial metal pipes, pre-insulated district heat systems, systems for supplying gas, metallic materials, thermoplastics, aluminum and its alloys, castings of aluminum alloys and magnesium alloys, steel castings, steel forgings, steel plates of thickness 6 mm and larger, steel tubes, welded steel tubes for pressure and welded steel tubes, strips and sheets used for the manufacture of welded pipes, flat products made of austenitic and ferritic-austenitic stainless steel and 6mm higher.

2. Testing of pressure vessels and leakage test (first testing of pressure vessels, testing of pressure vessels in operation, leak test)

Stable pressure equipment that can be loaded with pressure.

3. NON- IONISING RADIATION TESTING

Electromagnetic radiation testing.

4. Examination of working environment

4.1. Chemical analysis

Determination of mass concentration of acetone, ammonia, nitrogen dioxide, sulfur dioxide, carbon monoxide, formaldehyde, metilacetata, methanol, ozone, hydrogen sulfide, ethanol, acrolein, chlorine, hydrogen chloride, hydrogen fluoride, mercaptans, aromatic hydrocarbons BTEX, hydrocarbons: hexane, heptane, cyclohexane, metilcikloheksan, pentane, butane, metals and metalloids in the workplace and workplace atmosphere (Pb, Cd, Ni, Mn, Cr, Zn, Mg, Cu, Cr, Fe, Hg, Be, As, Ba, Ca, Co , Se, Sn, Na / K, Al), total polycyclic aromatic hydrocarbons, smoke-catran combustion of fuel oil, smoke-catran number, dimethoate, hydrogen peroxide, phthalates, volatile organic compounds, PCBs, tetrahydrofuran, PAHs , vinyl acetate, particles of lead and lead compounds, acrylonitrile, acetic acid, asbestos, biological hazards and chemical hazards in the workplace.

4.2. Biological tests

Examination of the presence of microorganisms (bacteria, mold, parasites, etc.) in the workplace (Contact surface, air) and working environment.

4.3. Physical examination

Investigation of microclimatic parameters (air temperature, relative humidity and air velocity), determining the intensity of thermal radiation and light intensity.

4.4. -

Measuring of noise in the environment and working environment, determination of sound power noise, vibration testing of human (measuring effective values ​​of velocity and acceleration amplitude of vibration transmitted to the body and mans effective value of the amplitude of vibration speed and acceleration of the arms and hands) and vibration of machines and tools (measuring effective values ​​of the amplitude of vibration speed and acceleration) and testing of construction materials, construction elements of structures, buildings and halls (field measurements of air sound insulation of facade elements and facades, sound insulation of air between rooms, isolation Formwork sound reduction and reverberation time measurements).

 

 

  • Request for measuring the concentration of explosive gases and vapors

    Request for measuring the concentration of explosive gases and vapors

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II MEASURING DATA
    1. Measuring location:
    2. The plant where the measuring is done (general features):
    3. Types of stored flammable fluids:
    4. Was there cleaning and degassing?
    YES
    NO
    5. Is there ventilation at the site?
    YES
    NO
    6. Do you have documentation of the determination of hazardous zones?
    YES
    NO
    7. Do you have a mechanical project installation?
    YES
    NO
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for nondestructive testing

    Request for nondestructive testing

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II DATA ON TEST CASE
    1. Type of test (check):
    visual examination
    penetrant testing
    magnetic particle testing
    radiographic examination
    ultrasonic examination
    measurement of thickness with ultrasound
    2. Name:
    3. Location:
    4. Dimensions (diameter / wall thickness of material):
    5. Material:
    6. Indicate the quantity (number, m, m2, etc.). To be examined:
    7. Technical caracteristics - if necessary (working fluid, power, pressure, temperature, insulation, heat treatment, etc..):
    8. Additional description and specifications (if necessary):
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Required documents for the report on testing of waste for cross-border movement for export

    Required documents for the report on testing of waste for cross-border movement for export

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    A. GENERAL INFORMATION
    1. Exporter of the waste:
    2. Importers of waste:
    3. Mediator in the transit of waste:
    4. Intended carrier:
    5. Producer of waste:
    6. Description of the process of waste:
    7. Tray / processor of waste:
    8. The total amount of waste destined for export (the Agreement):
    9. Exporting Country:
    10. Country / countries of transit:
    11. Country of import:
    12. Projected period for exports:
    13. Mode of transport:
    14. Packaging:
    B. DATA ON WASTE
    1. Name and composition:
    2. The amount of the wastes from which to perform sampling:
    3. Classification of waste according to Waste Catalogue:
    4. National Designation of waste in the country of import:
    5. Customs code (HS):
    6. The procedure and method of disposal or re-utilization of waste:
    - Procedure or method of disposal D list:
    - Procedure or method of re-utilization R list:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for emissions measurement

    Request for emissions measurement

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II MEASURING DATA
    1. Location of sampling:
    2. The plant where the measurements are done (general features):
    3. Number of emiters (shape and size):
    4. Parameters that would be subject of examination:
    5. Does the site have access to the measuring points?
    YES
    NO
    6. Are there built-in ports for sampling?
    YES
    NO
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code::
  • Request to examine the quality of ambient air

    Request to examine the quality of ambient air

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II EXAMINATION DATA
    1. Location of sampling:
    2. Whether the site provided access to the source of electricity?
    YES
    NO
    3. The number of measuring points on which the sampling is done:
    4. Parameters for examination:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for examination of stable pressure vessels

    Request for examination of stable pressure vessels

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II DATA ON TEST CASE
    1. Data on test case (check):
    First examination of pressure vessels
    Testing of pressure vessels in service
    Impermeability Testing
    2. Location of vessel:
    3. Name of vessel:
    4. Manufacturer:
    5. Factory number:
    6. Production year:
    7. Volume:
    8. Work medium:
    9. Maximum allowable pressure [bar]:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for examination of water

    Request for examination of water

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II DATA SAMPLING
    1. Location of sampling:
    2. Number of samples:
    3. Type of water samples:
    surface
    underground
    drinking
    waste
    other
    4. Is it provided safe access to the site of sampling?
    YES NO
    5. Parameters for examination:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for testing of soil and sediment

    Request for testing of soil and sediment

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II MEASURING DATA
    1. Location of sampling with a brief description:
    2. Number of samples:
    3. Is it provided safe access to the site of sampling?
    4. Parameters for examination:
    5. The reason for the soil test:
    order of inspector monitoring
    estimate of zero state recultivation
    damage other
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for examination of waste

    Request for examination of waste

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II WASTE DATA
    1. Producer of waste:
    2. Owner of waste:
    3. Name of waste:
    4. Description of the process of waste:
    5. Whether the waste has suffered some kind of physical or chemical treatment (crushing, grinding, heating, neutralization, etc.)?
    YES
    NO
    6. The physical state of waste:
    powder
    solid
    viscous substances
    pasta
    sludge
    liquid substance
    gaseous substance
    other (specify)
    7. Actual amount of waste that is sampling (kg, t):
    8. Index number of waste from the Waste Catalogue (Official Gazette. RS no. 56/10):
    III DATA OF WASTE STORAGE
    1. Location of waste storage:
    2. Means of storing the waste (if the package in question, state the type of packaging and size):
    3. Opportunity for sampling of waste:
    4. Other information that might be relevant (technological scheme of waste, safety and security list of chemicals that enter the process of waste generation, etc.): NOTE: If such data exists, it should be sent by e-mail after completing the questioneer
    IV PURPOSE OF THE ISSUANCE OF THE REPORT
    1. Physical state of waste:
    for physical-chemical treatment
    for heat treatment
    for biological treatment
    for disposal in landfill
    for cross-border movement
    2. For the cross-border movement of wastes (waste classification for the cross-border movement / export, import, transit), it is necessary to fill additional questionnaires:
    1. Questionnaire for exporting waste
    2. Questionnaire for the import of waste
    3. Questionnaire for the transit of waste
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Required documents for the report on testing of waste for cross-border movement for transit

    Required documents for the report on testing of waste for cross-border movement for transit

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    A. GENERAL INFORMATION
    1. Exporter of the waste:
    2. Importers of waste:
    3. Mediator in the transit of waste:
    4. Intended carrier:
    5. Producer of waste:
    6. Description of the process of waste:
    7. Tray / processor of waste:
    8. The total amount of waste destined for export (the Agreement:
    9. Exporting Country:
    10. Country / countries of transit:
    11. Country of import:
    12. Projected period for exports:
    13. Mode of transport:
    14. Packaging:
    B. DATA ON WASTE
    1. Name and composition:
    2. The amount of the wastes from which to perform sampling:
    3. Classification of waste according to Waste Catalogue:
    4. National Designation of waste in the country of import:
    5. Customs code (HS):
    6. The procedure and method of disposal or re-utilization of waste:
    - Procedure or method of disposal D list:
    - Procedure or method of re-utilization R list:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for agricultural and food products and items of general use

    Request for agricultural and food products and items of general use

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II EXAMINATION DATA
    1. Sample name:
    2. If it is necessary to perform sampling, place of sampling:
    3. Number of samples:
    4. Exminations (check):
    food security (physical and chemical quality testing, physical and chemical contaminants, microbiological safety, with and without radiological examination, sensory examination and review of the declaration)
    physico-chemical quality testing
    microbiological examination
    radiological
    sensory testing
    for declaration
    additional testing (as required, specify):
    5. Note:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for noise measurement

    Request for noise measurement

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II MEASURING DATA
    1. Location of sampling:
    2. Measurement is done in:
    Work environment
    Environment
    		Give a brief description:
    3. The provisional number of measuring points:
    4. It is necessary to perform:
    Day measuring
    Night measuring
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Request for measuring of human vibration

    Request for measuring of human vibration

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    II MEASURING DATA
    1. Location of sampling:
    2. Type of vibration
    Vibration of arms - hands
    Body Vibration
    1. The provisional number of measuring points:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:
  • Required documents for the report on testing of waste for cross-border movement for imports

    Required documents for the report on testing of waste for cross-border movement for imports

    I GENERAL INFORMATION
    1. Requests submitter name:
    2. Adress of requests submitter:
    3. Phone: Fax:
    4. Company ID: Tax ID:
    5. Contact person: Phone: Fax: E-mail:
    A. GENERAL INFORMATION
    1. Exporter of the waste:
    2. Importers of waste:
    3. Mediator in the transit of waste:
    4. Intended carrier:
    5. Producer of waste:
    6. Description of the process of waste:
    7. Tray / processor of waste:
    8. The total amount of waste destined for export (the Agreement):
    9. Exporting Country:
    10. Country / countries of transit:
    11. Country of import:
    12. Projected period for exports:
    13. Mode of transport:
    14. Packaging:
    B. DATA ON WASTE
    1. Name and composition:
    2. The amount of the wastes from which to perform sampling:
    3. Classification of waste according to Waste Catalogue:
    4. National Designation of waste in the country of import:
    5. Customs code (HS):
    6. The procedure and method of disposal or re-utilization of waste:
    - Procedure or method of disposal D list:
    - Procedure or method of re-utilization R list:
    III THE PERSON DATA WHO COMPLETED THE APPLICATION
    1. Name, surname and function:
    2. Mobile: Phone: Fax:
    3. E-mail:
    4. Date of filling the request:
     
    Image code:

Fill out the required fields:

asd

The request is not forwarded due to technical problems.

The request was sent successfully